Νέο
AC/DC TIG welder 200A with plasma cutter 50A
- Διαθεσιμότητα: 1 - 3 Ημέρες
- Κωδικός: K2001B
Products Sold: 0
Product Views: 49
620,00€
Χωρίς ΦΠΑ: 500,00€
200 D FEATURES & BENEFITS:
- 3in1 combination unit: AC/DC TIG, MMA/STICK, plasma cutting.
- AC/DC TIG welding: processes all weldable metals, including aluminum
- HF ignition (TIG)
- MMA/STICK/E-HAND: coated electrodes are used - in this process the electrodes are arc carrier and filler metal in one.
- Hotstart: overcurrent is provided each time the welder is restarted, helping to ignite the arc.
- Arc-Force: molten material is more easily transferred to the workpiece. Prevents the arc from being extinguished if this material causes contact between the electrode and the molten pool.
- Anti-stick: automatically shuts down the welding generator if the electrode sticks to the workpiece and must be removed by hand without damaging the electrode clamp.
- Plasma Cutter: CUT function using a plasma jet generated by electricity. This melts the material and carries it away with compressed air, creating a precise cut. All conductive metals can be cut with this method (e.g. steel, stainless steel, aluminum, copper, etc.).
- cutting thickness: maximum 12mm (hand guided), quality cut 8mm (hand guided)
- advanced IGBT (Insulated Gate Bipolar Transistor) enables fast and thus low-loss switching of electrical currents
200 D FEATURES:
200 D TECHNICAL DETAILS:
| Welding current setting range (TIG mode) | 10-200 A |
| Welding current setting range (MMA/STICK mode) | 10 -170 A |
| Welding current setting range (CUT mode) | 10 - 50 A |
| Duty cycle (ED) TIG 40°C | 200 A at 18 V 40% |
| Duty cycle (ED) MMA/STICK 40°C | 170 A at 26.8 V 25% |
| Duty cycle (ED) Plasma cutter 40°C | 50 A at 100 V 40% duty cycle |
| Mains voltage | 1 x 230 Volt |
| Mains frequency | 50 - 60 Hz |
| Protection class | IP23S |
| Dimensions in mm (L x W x H) | 425 x 152 x 291 |
| Weight in kg | 9,5 |
| Standards | EN60974-1 / EC60974-1 |
| Maximum cutting capacity (hand guided) | 12 mm |
| Quality cutting capacity (hand guided) | 8 mm |
200 D SYSTEM CONTROL:
| 1. display | 6. amperage (A) | 11. 2 stroke/ 4 stroke |
| 2. hotstart/arc force | 7. % selection | 12. mode (MMA/WIG/CUT) |
| 3. AC/DC mode | 8. frequency (Hz) | 13. parameter settings |
| 4. setting knob | 9. on/off | |
| 5. time (seconds) | 10. overheating indicator |